Series 3 PORTA-WAND with MOLDED PEEK wafer tip VMWT-C, handles up to 8” (200mm) wafers, 110-220 VAC.
This PORTA-WAND 3 kit comes with a fixed internal 9.6V NiMH rechargeable battery, an in-stand charger (P/N VPW-CHARGER-110-220) and one MOLDED PEEK wafer tip. Ideal for handling wafers, disk media or any item that has a flat, hard surface. Easily lifts 300mm wafers. Rear exhaust of the pump air is standard on these units. The OPERATION INDICATOR turns on only when proper vacuum has been established to firmly grip the wafer. The same light flashes when the battery needs to be recharged. A PUSH-BUTTON provides easy on/off control. An internal air filter (VF-40M-5) is replaceable from the front of the tool, and an internal exhaust filter ensures better than Class 1 performance.
Optional Feature: The two pins at the front of the tool allow use of the optional anti-rotate adaptor. This adaptor locks any of our molded wafer tips into one of eight rotational positions around the front of the wafer handling tool. See item number VMWT-ADAPT-AR on page 32 for a description of the operation.
This kit comes with a Switching Power AC Adapter that includes both 110 Volt and 220 Volt blades.
系列3 porta-wand模压PEEK晶片端vmwt-c，处理高达8”（200mm）晶片，110-220伏。
这porta-wand 3工具包带有一个固定的内部9.6V镍氢可充电电池，一个充电器（P / N站vpw-charger-110-220）和一个成型的PEEK晶片尖端。理想的处理晶圆，磁盘媒体或任何项目，有一个平面，坚硬的表面。很容易把300mm晶圆。泵空气的后排气在这些装置上是标准的。只有在设置适当的真空以牢牢控制晶片时，操作指示灯才能打开。当电池需要充电时，同样的灯会闪烁。按钮提供简单的开/关控制。一个内部的空气过滤器（vf-40m-5）是可更换工具的前面，和一个内部的排气过滤器保证了更好的性能比1级。
可选功能：在工具前面的两个引脚允许使用可选的反旋转适配器。这个适配器将任何我们的模制晶片尖端锁定在晶片处理工具前面的八个旋转位置中的一个。看说明操作32页项目编号vmwt-adapt-ar。
此套件配备了开关电源适配器，包括110伏和220伏的刀片。
