PEN-VAC, ESD safe, 5 3/4" silver body, kit with (3) bent probes with 1/8", 1/4" and 3/8" cups and (1) straight probe with 1/4" diameter conductive silicone cups.

The PEN-VAC is totally self-contained.  There are no batteries or hoses to get in the way.  Operation is as follows:

1.    Select a tip with a rubber vacuum cup on a probe that is slightly smaller than the part you want to pick and place.  Put the probe snuggly on the tip of the vacuum pen.  Make sure that there is no dust on the rubber vacuum tip.  NOTE: Our larger rubber vacuum cups can be placed directly on the vacuum pen tip without using a probe.

2.    Depress AND hold the button on the side of the tool.

3.    Touch the vacuum tip squarely to the part and release the button.  The part is now grasped.

4.    Move the part to where you want it and depress the button again.  The part is now released.

NOTE: This tool works only with the rubber vacuum tips.  The rubber is required for an air-tight seal.

PEN-VAC，防静电保护，5 3/4“银色机身，配有（3）个弯曲探头和1/8”、1/4”和3/8“皮碗，以及（1）个直探头和1/4”直径导电硅胶皮碗。

PEN-VAC是完全独立的。没有电池或软管阻挡。操作如下：

1。选择一个探针上带有橡胶真空杯的尖端，该探针略小于要拾取和放置的零件。把探针紧贴在真空笔的顶端。确保橡胶真空吸嘴上没有灰尘。注意：我们较大的橡胶真空杯可以直接放在真空笔头上，而不用探针。

2。按住工具侧面的按钮。

三。将真空吸嘴垂直接触零件并松开按钮。现在抓住了这一部分。

4。将部件移动到所需位置，然后再次按下按钮。零件现在释放。

注意：此工具仅适用于橡胶真空吸嘴。密封需要橡胶。