The anti-wobble tool is designed for enhanced functionality when handling INTEL LGA CPU products.  This tool improves placment accuracy when picking processor chips from a shipping tray and placing into precision sockets. This BULB-VAC features an anti-wobble stiffener cone and a 3/4" diameter Non-marking Static Dissipative Buna-N vacuum cup.   This tool is designed to work only with a 3/4" diameter vacuum cup.  The rubber vacuum cup is required for proper operation.  Our vacuum-bulb type tools are the lowest cost pick-and-place tools available. These tools are simple to operate.  First make sure that the surface of the vacuum cup is clean.  Next simply squeeze the vacuum bulb, place the soft suction cup squarely on top of the part to be handled, then relax your squeeze on the bulb and the part is firmly gripped. A second squeeze of the bulb releases the part. 

Overall dimensions are 3.4" (86.4mm) long by 1.46" (37.1mm) wide.  All materials are ESD safe.

Applications for this tool include pick-and-place of any size of LGA processor.  In the factory it is ideal for picking processors from trays and placing them into motherboard sockets.  For field service operations it is ideal for picking the processor from the shipping tray and placing it into a motherboard socket.  The anti-wobble cone provides stability when placing large processors into precision sockets.  This tool can be used for handling a variety of large substrates.

VACUUM CUP REPLACEMENT 
1. Replacement vacuum cups are available from Virtual Industries, Inc.  Order NO. V9075-B
2. Hold the squeeze bulb in one hand and pull the vacuum cup off of the tool with your other hand.
3. Line up the hole in the stem of the replacement vacuum cup with the barb protruding from the tool tip and push the cup on while providing a turning motion to the surface of the vacuum cup with your thumb until the vacuum cup is seated. 
4. The tool is now ready for use.

抗摇摆工具是为处理英特尔LGA-CPU产品而设计的增强功能。该工具提高了从装运托盘中取出处理器芯片并放置到精密插座中时的放置精度。该BLB-VAC具有防摆加强筋锥和3/4“直径无标记静态耗散Buna- N真空杯。该工具的设计仅适用于直径为3/4英寸的真空杯。橡胶真空杯需要适当的操作。我们的真空灯泡型工具是最低成本的拾取和放置工具。这些工具操作简单。首先要确定真空杯的表面是干净的。接下来，简单地挤压真空灯泡，将软吸盘正方形地放置在要处理的零件的顶部，然后放松对灯泡的挤压，零件被牢牢地抓住。灯泡的第二次挤压释放了部分。

整体尺寸为3.4英寸（84.4mm）长1.46英寸（37.1mm）宽。所有材料均为ESD安全。

该工具的应用包括任意大小的LGA处理器的拾取和放置。在工厂中，从托盘中取出处理器并将它们放入主板插座是理想的。对于现场服务操作，从托盘中挑选处理器并将其放入主板插座是理想的。防摆锥提供稳定的大处理器放入精密插座。该工具可用于处理各种大型基板。

真空杯更换

1。更换真空杯可从虚拟工业公司订购V9075-B

2。用一只手握住挤压球，用另一只手把真空杯从工具上拉开。

三。用从工具尖端突出的倒钩将更换的真空杯的阀杆上的孔排成一行，同时用拇指向真空杯的表面提供转动运动，直到真空杯就座。

4。该工具现在可以使用了。