The ADJUST-A-VAC was developed as a result of customer concerns about manual handling of very thin/delicate substrates, wafers, MEMS devices and other very fragile components.  This vauum-tweezer allows the operator to adjust the vacuum level from just below atmospheric pressure to up to ten inches of mercury depending on the fragility of the part being handled.  An integrated  ten segment bar-graph-display visibly shows the vacuum level present during handling operations.   The bar graph will show minmum vacuum pressure until a part is grasped and then the bar graph displays the vacuum level presented to the part being handled.  Additionally, the vacuum port integrates a user replaceable inlet filter that protects operation of the tool from dust particles.  This Vacuum Tweezer is available in various kits depending on your handling application.  Kits are available in 110 or 220 volt operation.

This ESD safe Kit Includes:

5 feet of coiled vacuum hose.

Bar graph power-on and vacuum-level indicator.

Adjustment knob for vacuum level.

Rubber no-skid feet.

ESD ground connection is by three wire power cord.

Produces vacuum of up to ten inches of mercury.

Wafer wand and wafer tip.

Note: Other models available with different tip sizes.

Quantity Pricing Available - Please call  CHINA(0086) 512-66324801 for more information 

调整-A VAC的开发是由于客户对手动处理非常薄/精致的基板、晶片、MEMS器件和其他非常易碎元件的关注。这个VAUM镊子允许操作员根据正在处理的部件的脆弱性，将真空度从刚刚低于大气压力调节到十英寸汞柱。一个集成的十段条形图显示直观地显示了在操作过程中出现的真空度。条形图将显示微小的真空压力，直到一部分被抓住，然后条形图显示被处理的部分的真空水平。此外，真空端口集成了用户可更换的进口过滤器，保护工具的操作免受灰尘颗粒的影响。这种真空镊子可根据您的操作应用在各种试剂盒中使用。工具包可在110或220伏操作。

该ESD安全套件包括：

5英尺的盘旋式真空软管。

条形图上电和真空度指示器。

真空度调节旋钮。

橡胶无滑脚。

ESD接地是用三线电源线。

产生高达十英寸汞柱的真空度。

晶片棒和晶片尖端。

注：其他型号有不同的小费尺寸。

数量定价-请致电中国（0086）512-66324801以获取更多信息

WAFER-VAC system with 4 inch molded wafer tip (VMWT-A)

220 Volt 50/60 Hz. This compact unit will handle a wide variety of wafers, solar cells and other substrates. The long-life diaphragm vacuum pump generates up to 10 inches of mercury with an open air flow of 2.3 lpm. The unit connects to ground automatically with a three-wire power cord. This WV-9000 comes complete with the following features:

Lighted On/Off switch.

Whisper-quiet operation.

Long-life pump.

Class 100 Cleanroom Safe

Push-button wafer tip pen VWP-500-2.5mm

6 foot clear coiled vacuum hose (VCH-2.5mm-6).

Rubber no-skid feet.

Top mounted handle holder.

Foot print measures 7-1/4" X 3" X 2-1/2"  (185mm X 76mm X 64mm).

VMWT-A molded wafer tip for handling up to 4" wafers 

Produces 10 inches of mercury.

带4英寸模铸晶圆尖端的晶圆真空吸尘系统（VMWT-A）

直接插入2200伏50/60赫兹的通用晶片真空处理工具。这个紧凑的单元将处理各种各样的晶圆，太阳能电池和其他基板。长寿命隔膜真空泵产生高达10英寸的汞，开放空气流量为2.3 lpm。该装置用三线电源线自动接地。此WV-9000配有以下功能：

亮起/熄灭开关。

小声安静地操作。

长寿命泵。

100级洁净室保险箱

按钮式晶片尖笔VWP-500-2.5mm

6英尺透明螺旋真空软管（VCH-2.5mm-6）。

橡胶防滑脚。

顶部安装的把手支架。

电动泵尺寸为7-1/4“x 3”x 2-1/2“（185mm x 76mm x 64mm）。

VMWT-A用于处理最多4“晶圆的成型晶圆尖端

产生10英寸汞。

WAFER-VAC system with 6 inch molded wafer tip (VMWT-B)

A general purpose wafer vacuum handling tool that plugs directly into 220 Volt 50/60 Hz. This compact unit will handle a wide variety of wafers, solar cells and other substrates. The long-life diaphragm vacuum pump generates up to 10 inches of mercury with an open air flow of 2.3 lpm. The unit connects to ground automatically with a three-wire power cord. This WV-9000 comes complete with the following features:

Lighted On/Off switch.

Whisper-quiet operation.

Long-life pump.

Class 100 Cleanroom Safe

Push-button wafer tip pen VWP-500-2.5mm

6 foot clear coiled vacuum hose (VCH-2.5mm-6).

Rubber no-skid feet.

Top mounted handle holder.

Foot print measures 7-1/4" X 3" X 2-1/2"  (185mm X 76mm X 64mm).

VMWT-B molded wafer tip for handling up to 6" wafers 

Produces 10 inches of mercury.

带6英寸成型晶圆尖端的晶圆真空吸尘系统（VMWT-B）

一种通用的晶片真空处理工具，直接插入220伏50/60赫兹。这个紧凑的单元将处理各种各样的晶圆，太阳能电池和其他基板。长寿命隔膜真空泵产生高达10英寸的汞，开放空气流量为2.3 lpm。该装置用三线电源线自动接地。此WV-9000配有以下功能：

亮起/熄灭开关。

小声安静地操作。

长寿命泵。

100级洁净室保险箱

按钮式晶片尖笔VWP-500-2.5mm

6英尺透明螺旋真空软管（VCH-2.5mm-6）。

橡胶防滑脚。

顶部安装的把手支架。

电动泵尺寸为7-1/4“x 3”x 2-1/2“（185mm x 76mm x 64mm）。

VMWT-B成型晶圆尖端，可处理多达6英寸的晶圆

产生10英寸汞。

WAFER-VAC system with 8 inch molded wafer tip (VMWT-C)

A general purpose wafer vacuum handling tool that plugs directly into 220 Volt 50/60 Hz. This compact unit will handle a wide variety of wafers, solar cells and other substrates. The long-life diaphragm vacuum pump generates up to 10 inches of mercury with an open air flow of 2.3 lpm. The unit connects to ground automatically with a three-wire power cord. This WV-9000 comes complete with the following features:

Lighted On/Off switch.

Whisper-quiet operation.

Long-life pump.

Class 100 Cleanroom Safe

Push-button wafer tip pen VWP-500-2.5mm

6 foot clear coiled vacuum hose (VCH-2.5mm-6).

Rubber no-skid feet.

Top mounted handle holder.

Foot print measures 7-1/4" X 3" X 2-1/2"  (185mm X 76mm X 64mm).

VMWT-C molded wafer tip for handling up to 8" wafers 

Produces 10 inches of mercury.

带8英寸成型晶圆尖端的晶圆真空吸尘系统（VMWT-C）

直接插入220伏50/60赫兹的通用晶片真空处理工具。这个紧凑的单元将处理各种各样的晶圆，太阳能电池和其他基板。长寿命隔膜真空泵产生高达10英寸的汞，开放空气流量为2.3 lpm。该装置用三线电源线自动接地。此WV-9000配有以下功能：

亮起/熄灭开关。

小声安静地操作。

长寿命泵。

100级洁净室保险箱

按钮式晶片尖笔VWP-500-2.5mm

6英尺透明螺旋真空软管（VCH-2.5mm-6）。

橡胶防滑脚。

顶部安装的把手支架。

电动泵尺寸为7-1/4“x 3”x 2-1/2“（185mm x 76mm x 64mm）。

VMWT-C模压晶片端头，可处理多达8英寸的晶片

产生10英寸汞。

The WAFER-VAC™ ELITE was developed as a result of customer concerns about firmly grasping critical components and not dropping them due to  a vacuum leak.  This VACUUM TWEEZER™ uses an integrated ten segment bar-graph-display visibly shows the vacuum level present during operation.  The bar graph will show minimum vacuum pressure until a part is grasped and then when a part is grasped the bar graph displays the vacuum level presented to the part being handled.  Additionally, the vacuum port integrates a user replaceable inlet filter that protects operation of the tool from dust particles.  This VACUUM TWEEZER™ is available in various kits depending on your handling application. 

NOTE: This item will not function properly without filter, see below for replacement intake filters (VF-40M-5).  NOTE: Other Molded PEEK™ Wafer Tip sizes available.

These ESD-SAFE kits feature:

 Dimensions 8” X 3” X 3.5” (203mm X 76mm X 89mm).

 Bar graph power-on and vacuum-level indicator.

 Class 100 Cleanroom Safe.

 Whisper-quiet operation.

 Long-life pump.

 Side mounted handle holder.

 Rubber no-skid feet.

 ESD ground connection is by three wire power cord.

 Produces vacuum of up to ten inches of mercury.

 Replaceable inlet filter.

This kit includes:

 COILED-VACUUM-HOSE-6 (VCH-2.5MM-6-BLK)

 PUSH-BUTTON-WAFER-PEN (VWP-500-2.5MM)

 Molded PEEK™ WAFER TIP (VMWT-C)

 3 WIRE POWER CORD

The WAFER-VAC™ ELITE was developed as a result of customer concerns about firmly grasping critical components and not dropping them due to  a vacuum leak.  This VACUUM TWEEZER™ uses an integrated ten segment bar-graph-display visibly shows the vacuum level present during operation.  The bar graph will show minimum vacuum pressure until a part is grasped and then when a part is grasped the bar graph displays the vacuum level presented to the part being handled.  Additionally, the vacuum port integrates a user replaceable inlet filter that protects operation of the tool from dust particles.  This VACUUM TWEEZER™ is available in various kits depending on your handling application. 

NOTE: This item will not function properly without filter, see below for replacement intake filters (VF-40M-5).  NOTE: Other Molded PEEK™ Wafer Tip sizes available.

These ESD-SAFE kits feature:

 Dimensions 8” X 3” X 3.5” (203mm X 76mm X 89mm).

 Bar graph power-on and vacuum-level indicator.

 Class 100 Cleanroom Safe.

 Whisper-quiet operation.

 Long-life pump.

 Side mounted handle holder.

 Rubber no-skid feet.

 ESD ground connection is by three wire power cord.

 Produces vacuum of up to ten inches of mercury.

 Replaceable inlet filter.

This kit includes:

 COILED-VACUUM-HOSE-6 (VCH-2.5MM-6-BLK)

 PUSH-BUTTON-WAFER-PEN (VWP-500-2.5MM)

 Molded PEEK™ WAFER TIP (VMWT-B)

 3 WIRE POWER CORD

威发-Vac™Elite的开发是由于客户担心牢牢抓住关键部件，而不是因为真空泄漏而掉落。此真空镊子™使用集成的十段条形图显示，可明显显示操作过程中的真空水平。条形图将显示最小真空压力，直到抓住一个零件，然后当抓住一个零件时，条形图将显示所处理零件的真空水平。此外，真空端口集成了一个用户可更换的入口过滤器，保护工具的操作不受灰尘颗粒的影响。此真空镊子可根据您的操作应用提供各种套件。

注意：如果没有滤清器，此项将无法正常工作，请参阅下面的“更换进气滤清器”（VF-40M-5）。注：可提供其他成型的Peek™晶片头尺寸。

这些ESD-SAFE套件具有：

尺寸8“x 3”x 3.5“（203mm x 76mm x 89mm）。

条形图通电和真空液位指示器。

100级洁净室保险箱。

小声安静地操作。

长寿命泵。

侧装把手支架。

橡胶防滑脚。

ESD接地采用三线电源线连接。

产生高达10英寸汞的真空。

可更换进口过滤器。

该套件包括：

盘绕式真空软管-6（VCH-2.5mm-6-BLK）

按钮式圆珠笔（VWP-500-2.5mm）

成型PEEK™晶片头（VMWT-B）

3线电源线