苏州赛浦斯电子有限公司

您好，欢迎访问苏州赛浦斯电子有限公司官网

简体中文 | English | 代理合作 | 关于我们 | 联系我们

咨询热线

0512-66324802

产品中心

首页 >> 产品中心

TV-1000-220

电动吸笔

市场价:0.00

价格:0.00
tv-1000

电动吸笔

市场价:0.00

价格:0.00
dtv-2000-220

电动吸笔

市场价:0.00

价格:0.00
dtv2000

电动吸笔

市场价:0.00

价格:0.00
真空吸笔TV-100

电动吸笔

市场价:0.00

价格:0.00
V8100A-FS-220-DLX-A真空吸笔

电动吸笔

市场价:0.00

价格:0.00
V8100A-FS-220-DLX-B真空吸笔

电动吸笔

市场价:0.00

价格:0.00
V8100A-FS-220-DLX-T真空吸笔

电动吸笔

市场价:0.00

价格:0.00
V8100A-FS-220-DLX-D真空吸笔

电动吸笔

市场价:0.00

价格:0.00
VFS-1真空吸笔

电动吸笔

市场价:0.00

价格:0.00
VHS-1真空吸笔

电动吸笔

市场价:0.00

价格:0.00
V8100A-220-HS真空吸笔

电动吸笔

市场价:0.00

价格:0.00
V8100A-220真空吸笔

电动吸笔

市场价:0.00

价格:0.00
真空吸笔V3200-CLN

电动吸笔

市场价:0.00

价格:0.00
HV-X

手动吸笔

市场价:0.00

价格:0.00

HANDI-VAC ONLY, No Attachments, with box. You buy the cups or cups and probes that you need seperatlyOur HANDI-VAC kits are a low cost pick-and-place tool that can go in everybody’s tool box. These tools are simple to operate: 1.    Select a tip with a rubber vacuum cup on a probe that is slightly smaller than the part you want to pick and place.  Put the probe snuggly on the tip of the HANDI-VAC tool.  Make sure that there is no dust on the rubber vacuum tip.  NOTE: Our larger rubber vacuum cups can be placed directly on the HANDI-VAC tip without using a probe. 2.    Gently squeeze the HANDI-VAC bulb, place the soft suction cup squarely on the pick-and place part, then relax your squeeze. The part is now firmly gripped. 3.    Move the part to where you need it and a second squeeze of the bulb releases the part.
V8902-LMS-B

手动吸笔

市场价:0.00

价格:0.00

PEN-VAC™, ESD-SAFE, 5 3/4" (146mm) black anodized aluminum body kit with three bent probes mounted with Non-marking Static Dissipative Buna-N Cup sizes 1/8" (3.18mm), 1/4" (6.35mm), 3/8" (9.53mm) diameter. Three straight probes mounted with Non-marking Static Dissipative Buna-N Cup sizes 1/8" (3.18mm), 1/4" (6.35mm), 3/8" (9.53mm) diameter. These vacuum pens are ideal for SMT assembly or for handling any parts that have a non-porous surface. No batteries or hoses to get in your way. Features a rear storage compartment for cups or probe.  The vacuum cups are Static Dissipative and non-marking.  The PEN-VAC™ is totally self-contained.PEN-VAC，ESD-安全型，5 3/4（146mm）黑色阳极氧化铝主体套件，带有三个弯曲探头，安装有无标记的静电耗散丁腈橡胶-N杯，直径1/8”（3.18mm），1/4”（6.35mm），3/8（9.53mm）。三个直探头，安装有无标记的静电耗散丁腈橡胶杯，尺寸为1/8”（3.18mm）、1/4”（6.35mm）、3/8（9.53mm）。这些真空笔是SMT组装或处理任何具有非多孔表面的零件的理想选择。没有电池或软管挡住你的路后储物箱可存放杯子或样品。真空吸盘为不防静电耗散型，无标记。真空笔是完全独立的。不防静电》
V8901-A-ESD

手动吸笔

市场价:0.00

价格:0.00

PEN-VAC, ESD safe, 5 3/4" silver body, kit with (3) bent probes with 1/8", 1/4" and 3/8" cups and (1) straight probe with 1/4" diameter conductive silicone cups.The PEN-VAC is totally self-contained.  There are no batteries or hoses to get in the way.  Operation is as follows:1.    Select a tip with a rubber vacuum cup on a probe that is slightly smaller than the part you want to pick and place.  Put the probe snuggly on the tip of the vacuum pen.  Make sure that there is no dust on the rubber vacuum tip.  NOTE: Our larger rubber vacuum cups can be placed directly on the vacuum pen tip without using a probe.2.    Depress AND hold the button on the side of the tool.3.    Touch the vacuum tip squarely to the part and release the button.  The part is now grasped.4.    Move the part to where you want it and depress the button again.  The part is now released.NOTE: This tool works only with the rubber vacuum tips.  The rubber is required for an air-tight seal.PEN-VAC，防静电保护，5 3/4“银色机身，配有（3）个弯曲探头和1/8”、1/4”和3/8“皮碗，以及（1）个直探头和1/4”直径导电硅胶皮碗。PEN-VAC是完全独立的。没有电池或软管阻挡。操作如下：1。选择一个探针上带有橡胶真空杯的尖端，该探针略小于要拾取和放置的零件。把探针紧贴在真空笔的顶端。确保橡胶真空吸嘴上没有灰尘。注意：我们较大的橡胶真空杯可以直接放在真空笔头上，而不用探针。2。按住工具侧面的按钮。三。将真空吸嘴垂直接触零件并松开按钮。现在抓住了这一部分。4。将部件移动到所需位置，然后再次按下按钮。零件现在释放。注意：此工具仅适用于橡胶真空吸嘴。密封需要橡胶。
V8910-9BK-ESD

手动吸笔

市场价:0.00

价格:0.00

PEN-VAC PRO SERIES black body, (2) bent, & (2) straight probes, 1/8,1/4,3/8,1/2" conductive silicone cups, packaged for pegboard display.The PEN-VAC is totally self-contained.  There are no batteries or hoses to get in the way.  Operation is as follows:1.    Select a tip with a rubber vacuum cup on a probe that is slightly smaller than the part you want to pick and place.  Put the probe snuggly on the tip of the vacuum pen.  Make sure that there is no dust on the rubber vacuum tip.  NOTE: Our larger rubber vacuum cups can be placed directly on the vacuum pen tip without using a probe.2.    Depress AND hold the button on the side of the tool.3.    Touch the vacuum tip squarely to the part and release the button.  The part is now grasped.4.    Move the part to where you want it and depress the button again.  The part is now released.NOTE: This tool works only with the rubber vacuum tips.  The rubber is required for an air-tight seal.Pen-Vac Pro系列黑色机身，（2）弯曲；（2）直探头，1/8、1/4、3/8、1/2“导电硅胶杯，包装用于钉板显示器。PEN-VAC是完全独立的。没有电池或软管阻挡。操作如下：1。选择一个探针上带有橡胶真空杯的尖端，该探针略小于要拾取和放置的零件。把探针紧贴在真空笔的顶端。确保橡胶真空吸嘴上没有灰尘。注意：我们较大的橡胶真空杯可以直接放在真空笔头上，而不用探针。2。按住工具侧面的按钮。三。将真空吸嘴垂直接触零件并松开按钮。现在抓住了这一部分。4。将部件移动到所需位置，然后再次按下按钮。零件现在释放。注意：此工具仅适用于橡胶真空吸嘴。密封需要橡胶。
V8902-LMS-ESD防静电吸笔

手动吸笔

市场价:0.00

价格:0.00

PEN -VAC, ESD -safe, 53 /4 (146 mm) corpo di allumina anodica nera, con tre sonde di curvatura, installate con vetro fuoricarico elettrostatico dissipativo nitrile butadiene in gomma -N, diametro 1 /8 (3.18 mm), 1 /4 (6.35 mm), 3 /8 (9.53 mm).Tre sonde rettilinee sono installate con coppe NBR dissipative elettrostatiche a vuoto con dimensioni di 1 /8 (3.18mm), 1 /4 (6.35mm) e 3 /8 (9.53mm).Questi aspiratori sono ideali per il montaggio SMT o il trattamento di qualsiasi parte con una superficie non porosa.Non ci sono batterie o tubi che bloccano il vostro modo di immagazzinare tazze o campioni nel bidone posteriore.Il getto sotto vuoto è un tipo di dissipazione elettrostatica.La penna a vuoto è completamente indipendente.AntistaticoPEN-VAC，ESD-安全型，5 3/4（146mm）黑色阳极氧化铝主体套件，带有三个弯曲探头，安装有无标记的静电耗散丁腈橡胶-N杯，直径1/8”（3.18mm），1/4”（6.35mm），3/8（9.53mm）。三个直探头，安装有无标记的静电耗散丁腈橡胶杯，尺寸为1/8”（3.18mm）、1/4”（6.35mm）、3/8（9.53mm）。这些真空笔是SMT组装或处理任何具有非多孔表面的零件的理想选择。没有电池或软管挡住你的路后储物箱可存放杯子或样品。真空吸盘为静电耗散型。真空笔是完全独立的。防静电》
V8910-BK-LMS-ESD

手动吸笔

市场价:0.00

价格:0.00

PEN-VAC PRO SERIES black body, probes (1) bent (1) straight each with 1/8" ((3.18mm), 1/4" (6.35mm) and 3/8" (9.53mm) diametermeter conductive silicone vacuum cups.The PEN-VAC is totally self-contained.  There are no batteries or hoses to get in the way.  Operation is as follows:1.    Select a tip with a rubber vacuum cup on a probe that is slightly smaller than the part you want to pick and place.  Put the probe snuggly on the tip of the vacuum pen.  Make sure that there is no dust on the rubber vacuum tip.  NOTE: Our larger rubber vacuum cups can be placed directly on the vacuum pen tip without using a probe.2.    Depress AND hold the button on the side of the tool.3.    Touch the vacuum tip squarely to the part and release the button.  The part is now grasped.4.    Move the part to where you want it and depress the button again.  The part is now released.NOTE: This tool works only with the rubber vacuum tips.  The rubber is required for an air-tight seal.Pen-Vac Pro系列黑色机身，探头（1）弯曲（1）笔直，每个带有1/8”（（3.18mm）、1/4”（6.35mm）和3/8”（9.53mm）直径的导电硅真空杯。PEN-VAC是完全独立的。没有电池或软管阻挡。操作如下：1。选择一个探针上带有橡胶真空杯的尖端，该探针略小于要拾取和放置的零件。把探针紧贴在真空笔的顶端。确保橡胶真空吸嘴上没有灰尘。注意：我们较大的橡胶真空杯可以直接放在真空笔头上，而不用探针。2。按住工具侧面的按钮。三。将真空吸嘴垂直接触零件并松开按钮。现在抓住了这一部分。4。将部件移动到所需位置，然后再次按下按钮。零件现在释放。注意：此工具仅适用于橡胶真空吸嘴。密封需要橡胶。
HV2-1.00-AW-PUR

手动吸笔

市场价:0.00

价格:0.00

HANDI-VAC-2™ with Anti-Wobble Tip and PureACleanTM blue, non-marking 1” (25.4mm) Diameter vacuum cup. HANDI-VAC®-2 is designed to pick up larger parts and to minimize wobble. Simply squeeze the vacuum bulb, place the soft suction cup to the part to be handled, then relax your squeeze and the part is firmly gripped. A second squeeze releases the part.Applications for this tool include pick-and-place of any size of LGA processor.  In the factory it is ideal for picking processors from trays and placing them into motherboard sockets.  For field service operations it is ideal for picking the processor from the shipping tray and placing it into a motherboard socket.  The anti-wobble cone provides stability when placing large processors into precision sockets.  This tool can be used for handling a variety of large substrates.  HADIN-VAC-2™带防摇晃尖端和pureacleantm蓝色，无标记1”（25.4毫米）直径的真空杯。Handi-Vac®-2的设计目的是收集更大的零件，并尽量减少摇摆。只需挤压真空球，将软吸盘放在要处理的部件上，然后放松挤压，部件牢牢抓住。第二次挤压释放零件。该工具的应用程序包括任意尺寸的LGA处理器的拾取和放置。在工厂中，它是从托盘中挑选处理器并将其放入主板插座的理想选择。对于现场服务操作，它非常适合从装运托盘中选择处理器并将其放入主板插座中。在将大型处理器放入精密插座时，抗摇摆锥体提供稳定性。该工具可用于处理各种大型基板。
HV2-KIT-4-ESD

手动吸笔

市场价:0.00

价格:0.00

This improved HANDI-VAC®-2 has a new and improved tip designed for better lifting capacity utilizing larger vacuum cups.  This new tip can be purchased with one cup of your choice for enhanced functionality and improved accuracy when picking and placing parts.  The entire tool is constructed with ESD-safe materials.
HV-KIT-II-PUR

手动吸笔

市场价:0.00

价格:0.00

HANDI-VAC® KIT, with (3) bent probes, (2) straight probes and (5) PureACleanTM blue, non-marking vacuum cups; 1/8", 3/16", 1/4", 3/8" and 1/2". Our vacuum-bulb type tools are the lowest cost pick-and-place tools available. These tools operate very similar to a tweezer. Simply squeeze the vacuum bulb, place the soft suction cup to the part to be handled, then relax your squeeze and the part is firmly gripped. A second squeeze releases the par
V8920E-A-ESD

手动吸笔

市场价:0.00

价格:0.00

PEN-VAC™ Junior, ESD-SAFE, 5" (127mm) anodized aluminum body kit with three bent probes mounted with Non-marking Static Dissipative Buna-N Cup sizes 1/8" (3.18mm), 1/4" (6.35mm), 3/8" (9.53mm) diameter, one straight probe mounted with Non-marking Static Dissipative Buna-N Cup size 1/4" (6.35mm) diameter.  These vacuum pens are ideal for SMT assembly or for handling any parts that have a non-porous surface. No batteries or hoses to get in your way. The PEN-VAC™ is totally self-contained.Pen-Vac™Junior，ESD-SAFE，5”（127mm）阳极氧化铝主体套件，带有三个弯曲探头，安装有1/8”（3.18mm）、1/4”（6.35mm）、3/8”（9.53mm）直径的无标记静电Buna-N杯，一个直探头安装有1/4”（6.35mm）直径的无标记静电Buna-N杯。直径。这些真空笔是SMT组装或处理任何具有非多孔表面的零件的理想选择。没有电池或软管挡住你的路。PEN-VAC™完全独立。
真空吸笔HV-KIT-B

手动吸笔

市场价:0.00

价格:0.00
V3024赛浦斯真空吸笔

手动吸笔

市场价:0.00

价格:0.00
v3025真空吸笔

手动吸笔

市场价:0.00

价格:0.00
VVP-200-1/16

手动吸笔

市场价:0.00

价格:0.00

1/16" (1.59mm) ID hose barb. Lightweight aluminum 1/2" diameter handle for vacuum handling systems. This new vacuum pen allows you to immediately pick up a part by touching the vacuum tip to the surface of the part. A slight press of the button releases the part. The unique design eliminates internal O-rings for years of maintenance free operation.5 1/4" (133.35mm) long, 1/2" (12.70mm) diameter.This product requires a continuous vacuum source.
VVP-200-1/8气动真空吸笔

手动吸笔

市场价:0.00

价格:0.00
真空吸笔VC-3-ESD

手动吸笔

市场价:0.00

价格:0.00
真空吸笔VC-3-075-AW-B

手动吸笔

市场价:0.00

价格:0.00
真空吸笔HV-30S/HV-25S/HV-20S

手动吸笔

市场价:0.00

价格:0.00
晶圆吸笔VPW6000AR-MW6-220

电动晶圆吸笔

市场价:0.00

价格:0.00
晶圆吸笔VPW6000AR-MW8-220

电动晶圆吸笔

市场价:0.00

价格:0.00
晶圆吸笔VPWE7000AR-MW6-220

电动晶圆吸笔

市场价:0.00

价格:0.00
晶圆吸笔VPWE7000AR-MW8-220

电动晶圆吸笔

市场价:0.00

价格:0.00
晶圆吸笔VPWE7300AR-MW4-220

电动晶圆吸笔

市场价:0.00

价格:0.00
VPWE7300AR-MW6-220晶圆吸笔

电动晶圆吸笔

市场价:0.00

价格:0.00
晶圆吸笔VPWE7300AR-VWT5R-AR

电动晶圆吸笔

市场价:0.00

价格:0.00
12寸吸笔VWWB-2A-MW12-1/8

气动晶圆吸笔

市场价:0.00

价格:0.00
8寸吸笔VWWB-2A-MW8-1/8

气动晶圆吸笔

市场价:0.00

价格:0.00
6寸吸笔VWWB-MW6-1/8

气动晶圆吸笔

市场价:0.00

价格:0.00
4寸吸笔VWWB-MW4-1/8

气动晶圆吸笔

市场价:0.00

价格:0.00
2-4寸高温VWWB-10020-1/8

气动晶圆吸笔

市场价:0.00

价格:0.00

< 12 3 4 5... 12 13 >

友情链接： 阿里网站淘宝店铺导热散热论坛中国LED网模切之家